Precautions for the use of ultra-thin cutting wheels

Beschreibung deines ersten Forums.

Precautions for the use of ultra-thin cutting wheels

Beitragvon juniperqq » Fr 12. Okt 2018, 11:59

Precautions for the use of ultra-thin cutting wheels
Points for attention:
1. Before installing the high efficient metal abrasive disc, please check carefully to confirm whether the cutting grinding wheel has deformation, cracks, cracks, etc.
2. When the flange is too small or the accuracy is poor, it is easy to damage the cutting wheel. Please use it after improvement.
3. When the cheap metal grinding disc is marked with rotation direction, it must be consistent with the turning direction of the machine tool. On the contrary, cutting is not sharp, and it is difficult to achieve the performance of cutting wheels.
4. If the cutting grinding wheel does not match the workpiece, abnormal wear and tear, poor sharpness, abnormal heating and so on are easy to occur.
5. During the process of cutting, if abnormal, stop immediately.
6. Grinding wheels are prohibited from cutting by hand, but not by hand or body contact.
7. China grinding abrasive disc is strictly prohibited for cutting or cutting off the outside operation, and avoid abnormal because of uneven force.
8. When cutting is not sharp, the grinding wheel must be trimmed. If it continues to use, it will overheat and overload and damage the wheel.
juniperqq
 
Beiträge: 8
Registriert: Do 30. Aug 2018, 09:28

Zurück zu Dein erstes Forum

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 7 Gäste

cron